• Small braiding of Xingshui valves to let you know the correct installation requi
    Industry information / 2019-08-29
    Before the valve is installed, the type and specifi...
  • The internal and external anticorrosion of the valve seat of the rod
    Common problem / 2017-06-13
    Body (including variable speed transmission box) in...
  • Elastic soft seal gate valve and hard seal gate valve in all aspects of the diff
    Common problem / 2017-06-13
    Hard seal is a seal between metal and metal, sealed...
  • Water control valve design selection points
    Common problem / 2017-06-13
    Automatic sprinkler system to be decompression, the...
  • Butterfly buffer check valve classification
    Common problem / 2017-06-13
    Butterfly buffer check valve disc was disc-shaped, ...
  • Contact us
    Service Hotline:0317-8339977
    200X leader type pressure-reducing valve

    200X leader type pressure-reducing valve

    Description:The structure is novel and reasonable and reasonable use of hydraulic principle.

    200 x pilot operated relief valve for high-level, high-rise building design, is to address the domestic water supply in high-rise constructions, fire water system, large flow, high sensitivity occasions ideal products. Its performance is superior, replace the intermediate water tank completely, save the cost of the cistern and enlarge the area of the building.

    The performance characteristics

    ◎The structure is novel and reasonable and reasonable use of hydraulic principle

    ◎The disc is fast open, no water hammer blow (closing time adjustable)

    ◎Good sealing and long service life

    ◎The work is steady and reliable and the traffic is high

    ◎The accuracy of the stabilization is high and the range is wide

    ◎The installation of maintenance is convenient

    Installation requirements

    Please refer to the installation requirements and the following requirements of the Y series adjustable pressure reducer.

    ◎It is recommended that the exhaust valve be installed in the network system so that the pressure relief valve can stabilize the job.

    ◎When installing, pay attention to the direction of the body arrow. To facilitate maintenance. A certain space should be left around the relief valve.

    ◎The pressure should not be less than 0.2 Mpa, less than 0.2 Mpa.


    HeBei XingShui Valve Manufacturing Group Co. LTD Copyright ©2002-2013 All Rights Reserved Website Approve:冀ICP备12008815号-1